Below are simple step-by-step instructions to remove the LCD screen from your laptop.
Step 1: Preparation and Identify Parts
- Make sure your laptop is unplugged and you have removed your battery.
Locate all screw covers on the display assembly. There are usually at lest 4 scrw covers, and they either be facing you on the diplay assembly or they may be on the side of the display assembly.
- The following Acer model has 6 screw covers of the display assembly facing the user.
Step 2: Removing Screw Cover
- Use a knife or some other sharp object like an exacto blade to pick off all the screw covers.
- Also remove screw covers from side of display assembly if any.
Step 3: Removing the bezel and bracket screws
- After removing each of the screws, starting at the bottom of the display assembly insert your fingers to unsnap the front bezel. Usually it will snap off easily. If the front bezel does not snap off easily, work the plastic in different directions until it unsnaps.
- After unsnapping the front bezel from the bottom of the display assembly work your fingers around the other sides. When you have worked your fingers around the display assembly to where the latch is located, you may have to slide the latch in order to detach the bezel.
- View of display assembly after front plastic bezel has been removed.
- Tilt the LCD screen forward. If you are unable to tilt the LCD screen forward, you may have to remove the screws from an internal bracket.
Step 4: Disconnectiong the video cable and installing your new screen
- This is a view of the back of the LCD screen. There will be 2 electronic connections that you will have to disconnect: the video (data) cable and the inverter (power) cable.
- Remove tape securing video cable if any. Some HP notebook models will not use tape; instead will have clips on eighter side of the video cable which you will have to press inwards to release.
- Slide video cable out. It's preferable that you use your finger nails instead of pulling on the video cable.
- You have now completely uninstalled your LCD screen.
Step 5: Install your new LCD screen.
- You can now reverse the process to install your new LCD screen.